为不同材料的打磨工艺
定制除尘方案Dust solutions matched to your material
金属、木材、铝、不锈钢——不同材料的粉尘特性不同，捕集与过滤配置也不同。Metal, wood, aluminum, stainless steel — every material behaves differently, and so does the right capture and filtration.
Metal Grinding
金属打磨产生火花与高密度颗粒，对吸力、阻燃和滤芯耐温有更高要求。推荐立式 / 卧式干式打磨台配阻燃滤芯与火花探测。Metal grinding produces sparks and dense particles, demanding strong suction, flame retardance and heat-tolerant filters. Recommended: dry vertical/horizontal benches with flame-retardant cartridges and spark detection.
- 火花探测 + 阻燃滤芯Spark detection + flame-retardant filter
- 推荐 G-L / G-W 系列Recommended: G-L / G-W series
Aluminum & Magnesium
铝、镁粉尘易燃易爆，干式收集风险高。必须采用湿式打磨台或水旋除尘柜，用水流在源头捕获粉尘，彻底消除爆炸风险。Aluminum and magnesium dust is highly combustible — dry collection is risky. Wet benches or water-cyclone cabinets capture dust at the source and eliminate explosion risk.
- 水流源头捕获，防爆设计Water capture at source, ex-proof
- 推荐 S-L / S-200 系列Recommended: S-L / S-200 series
Wood Sanding
木材打磨产生大量细木屑与木粉，颗粒细、浮力强，极易弥漫整个车间。推荐干式立式打磨台配高效滤筒，结合大风量将木粉在源头完全捕获。Wood sanding generates fine, buoyant dust that fills workshops quickly. Recommended: dry vertical bench with high-efficiency cartridge and large airflow to capture wood dust at the source.
- 大风量源头捕获细木粉High airflow captures fine wood dust at source
- 推荐 G-L / G-W 系列Recommended: G-L / G-W series
Stone Processing
石材切割与打磨产生含结晶硅粉尘，长期吸入引发矽肺职业病，危害极大。需要高风压、大风量的集尘方案，配备防爆滤芯与高效过滤，保障操作者健康。Stone cutting and grinding produces crystalline silica dust that causes silicosis — a serious occupational hazard. High-pressure, high-airflow capture with HEPA filtration protects operators.
- 高效过滤结晶硅粉尘，防矽肺HEPA filtration for crystalline silica, prevents silicosis
- 推荐 G-L / G-W 高风压系列Recommended: G-L / G-W high-pressure series
Carbon Fiber / Composite
碳纤维与复合材料打磨产生极细的碳丝与玻纤粉尘，导电性强，对人体和设备均有危害。需要专用抗导电滤芯与高密封性机体，防止粉尘对电气系统造成损害。Carbon fiber and composite sanding generates conductive fine carbon filaments and glass fiber dust — hazardous to both workers and equipment. Requires anti-static cartridges and high-seal enclosures.
- 抗静电滤芯，高密封机体Anti-static cartridge, high-seal enclosure
- 推荐 G-L / 吸尘柜 G-30GRecommended: G-L / Dust Cabinet G-30G
Welding Fume
焊接产生金属氧化物烟雾与有害气体，颗粒极细（0.1-1μm），需多级过滤 + 活性炭吸附层联合净化，既滤除颗粒物又吸附有害气体，全面保护操作者。Welding produces metal oxide fumes and hazardous gases at 0.1-1μm — requiring multi-stage filtration plus activated carbon to capture both particles and toxic gases.
- 多级过滤 + 活性炭层，净化有害气体Multi-stage + activated carbon for fume & gas
- 推荐 烟雾吸尘工作台 G-12XRecommended: Fume Extraction G-12X
Laser Cutting
激光切割产生高温金属烟雾、有机挥发物与超细颗粒，成分复杂、危害大。需要高效 HEPA 滤芯配合活性炭层净化，并要求设备具备一定耐热性与密封性。Laser cutting produces high-temperature metal fumes, volatile organics and ultrafine particles. Requires HEPA cartridges with activated carbon, plus heat resistance and tight sealing.
- HEPA + 活性炭，净化超细颗粒与 VOCHEPA + carbon for ultrafine particles and VOC
- 推荐 烟雾吸尘工作台 G-12XRecommended: Fume Extraction G-12X
还有更多应用工艺More processes we cover
不确定哪种方案适合您的材料？Unsure which fits your material?
把您的打磨材料和工况发给我们，免费获取方案建议。Send us your material and process for a free recommendation.